Cybernetica AS Department of Navigation Systems


EKTA logo

GPS Locator E934


We regret to inform you that this product is DISCONTINUED; please find our current products here
 

The purpose of the locator E934 is the position and time determination using the signals of the Global Position System (GPS). The position determination will be used for automatic detection of the buoy drift, the time detrmination is used for the synchronization of flashing of various aids to navigation. It consists of a GPS receiver and a micoprocessor based control unit, designed as a robust compounded device
 
Features
  • Periodical receiving of the GPS signals with the  user-defined period
  • During every receiving session e the deviations will  be determined: 
             - between the GPS coordinate values and storied nominal values;
             - between the GPS time value and the value of the built-in clock.
  • Computing and recording of the mean value of geographical coordinates.For this the coordinate values of of 256 last receiving sessions will be recorded in the memory 
  • Sending the time messages to the Abus local area network for  adjustment of the built-in clocks of local system units
  • Sending emergency messages to the communication controller,  connected to the Abus when
          - deviation of the geographical coordinates is greater than a pre-set value;
          - deviation of the mean value of geographical coordinates is greater
than a pre-set value;
          - the GPS signal could not be received during the proper time;
          - the voltage on the GPS receiver is below the pre-set limit.

Optionally, the functions of GPS locator can be reprogrammed
to address the specific requirements  of the customer.

Specifications
 
Input voltage 9 ... 30V DC
Current consumption
when stand-by
when receiving GPS signals

1.5mA
200mA
Deviation of coordinates
    with 95% probability
    average over 8 hours
15m
100m with "selective availability activated"
50m with "selective availability activated"
Time accuracy of the output message better than 10ms
Stability of the built-in clock 10ppm (when no GPS signal available)
Stability of the rising time of 
1 Hz synchro-puls

not worse than 5ms
Period of the receiving of GPS signals from 1 minute up to 2 hours
Format of timing messages Y,M,D,Min,Sec,mSec
Period of time messages from 1 minute up to 2 hours
Date rate at the Abus 9600bps
Temperature range from -30C to +60C (IEC 60068-2-11, 2, 14)
Relative humidity up to 98%, at temperature +35C (IEC 60068-2-3)
Dimensions 70x210x183mm
Weight  1.8kg
Layout and dimensions of the GPS Locator E934

If you need more information, including the information on prices and availability of our products, please do not hesitate to contact our marketing group.



ekta™ Home
Marine Products
LED Products for Signalling
Timers, 
Synchronisation and 
GPS Locators
Communication
Equipment and 
Systems
Contact 
Information
Marine Lanterns
Power Supplies, 
Battery Chargers
Measurement and Automation
Product Index

© 2002 Cybernetica. Last updated 2011-03-01