The LED Obstruction
Lights of the E59 family are designed for marking buildings, poles,
towers, smokestacks, and other potentially hazardous obstructions to air
traffic with steady red safety light. Light fixture of the lights
consists of circular printed circuit boards with light emitting diodes
(LED’s) and necessary electronics circuitry mounted on an aluminium shaft
fixed to a circular base plate, covered by a clear UV-stable impact resistant
polycarbonate or glass cupola, which is compounded to the base plate.
The assembly is fully sealed and has no user-serviceable parts inside.
| Models
of E59 Obstruction Lights
We offer several models of E59 LED
Obstruction lights to meet the customer requirements concerning light intensity
and vertical viewing angles:
|
Model
|
Conformance
to standards
|
Light radiating
patterns
|
|
E591
|
ICAO Aerodromes Annex
14, November 1999 |
Low-Intensity Type
A
10cd (+6°….10°) vertical
beam spread >10° |
|
E593
|
ICAO Aerodromes Annex 14,
November 1999 |
Low-Intensity Type
B
33cd (+6°….10°) vertical
beam spread >10° |
|
|
E59 versions
Each light model can be
supplied in different configuration depending on customer preferences regarding
the horizontal viewing angle, electrical
power supply, type of connection box, cupola material, and mounting options.
Available versions are listed in the table below.
|
Version ID
|
Horizontal
viewing angle
|
Power supply
voltage
|
Power consumption
of E591
|
Power consumption
of E593
|
Type of connection
box
|
Cupola
|
|
FA1G1
|
360°
|
230 VAC
|
5…7 W
|
10…16 W
|
one - cable
|
glass
|
|
FA2G1
|
360°
|
230 VAC
|
5…7 W
|
10…16 W
|
two - cable
|
glass
|
|
FD1G1
|
360°
|
48 VDC
|
5…7 W
|
10…16 W
|
one - cable
|
glass
|
|
FD2G1
|
360°
|
48 VDC
|
5…7 W
|
10…16 W
|
two - cable
|
glass
|
FC1G1
|
360°
|
24 VDC
|
5...7 W
|
10…16 W
|
one - cable
|
glass
|
FC2G1
|
360°
|
24 VDC
|
5...7 W
|
10…16 W
|
two - cable
|
glass
|
|
FA1P1
|
360°
|
230 VAC
|
5…7 W
|
10…16 W
|
one - cable
|
polycarbonate
|
|
FA2P1
|
360°
|
230 VAC
|
5…7 W
|
10…16 W
|
two - cable
|
polycarbonate
|
|
FD1P1
|
360°
|
48 VDC
|
5…7 W
|
10…16 W
|
one - cable
|
polycarbonate
|
|
FD2P1
|
360°
|
48 VDC
|
5…7 W
|
10…16 W
|
two - cable
|
polycarbonate
|
FC1P1
|
360°
|
24 VDC
|
5…7 W
|
10…16 W
|
one - cable
|
polycarbonate
|
FC2P1
|
360°
|
24 VDC
|
5…7 W
|
10…16 W
|
two - cable
|
polycarbonate
|
|
HA2P1
|
180°
|
230 VAC
|
3...5 W
|
5...8 W
|
two - cable
|
polycarbonate
|
ENVIRONMENTAL OPERATING CONDITIONS
| Ambient air
temperature |
from – 55°C to + 45°C (IEC
60068-2-1, IEC 60068-2-2, IEC 60068-2-14); |
| Relative humidity |
up to 98 % at temperature
up to +35°C (IEC 60068-2-3) |
| Salt mist conditions |
IEC 60068-2-11 |
| Mechanical vibration |
10 ... 500 Hz with acceleration
up to 2.0 g (IEC 60068-2-6) |
| Ingress Protection |
class: IP68 |
| Typical weight |
0.9kg (1.3kg with Type 1 mounting arm) |
| Cable gland |
PG16 |
| Outer diameter of the
cable |
10mm to 14mm |
Layout and dimensions
of the LED Obstruction Light E593 FA1G1
(glass cupola, connection
box with one cable port)
Download the E59 catalogue page in Adobe pdf
format
If you need more information, including
the information on prices and availability of our
products, please do not hesitate to contact
our marketing group.
NOTE: We have a distributor in place for Nordic markets. We are pleased to send you contact information if you need our Luftfartsvärket-approved LED Obstruction Light E592.1 for application in the Nordic countries.
CAUTION: LED light units are sources of bright light, do not stare directly into the beam from close distances and observe all the warnings and guidelines in the Instruction Manual. ekta™ E59X LED Obstruction Lights are classified as Class 2M LED devices according to the standard IEC 60825-1:1993+A1:1997+A2:2001.
Cybernetica AS reserves the right to revise and update the information in this document without obligation to notify any person.
|
