Sabik OÜ belongs to the Sabik Marine Division of the Carmanah Technologies Corporation EKTA logo


LED Indicator Panels Family E58

Combining the positive experiences gained during the years of designing Light Emitting Diode (LED) based aid to marine navigation and road traffic lights, we created a range of robust LED Indicator Panels for industrial light signalling applications spanning from access control to equipment status visualization and safety warnings. For over 10 years by now the E58XX units have been widely used on marine container spreaders and port cranes as safety indicator lights. Single white LED units (model E5811.W and E5821.W) can be used as emergency light sources.

The E58XX Indicator Panels integrate one to four partly embedded 96mm LED light signal modules under UV-stable impact resistant polycarbonate covers on a 10mm aluminium alloy base plate with black powder coated finish (RAL9005) and additional layer of clear protective lacquer. Similarly to our marine products, the electronic circuitry is potted in high quality casting resin to protect the assembly from destructive effects of vibration, providing efficient cooling at the same time. Only high quality LED’s from leading manufacturers (Avago (USA), Nichia (Japan)) are used. The lenses are moulded using a high-technology polycarbonate material Makrolon® originating from Bayer AG. Depending on application requirements, either clear (standard configuration), erosion-patterned (option E), Semi-transparent (option S) or Opaque (option O) cupolas can be ordered.

The LED Panel assembly is fully sealed and has no user-serviceable parts inside. The panel is supplied for surface mounting, horizontally or vertically, pole-mounting braces are optional.
 
 
Features
  • Long maintenance-free service life expectancy: may exceed 10 years due to resin potted LED technology and hi-tech Makrolon® cupolas
  • Low power consumption (less than 1W @ 24 VDC per light aspect) and a wide range of power supply voltages
  • No “phantom color” effect - under intensive sunlight, reflections from the unpowered modules are colorless and cannot be mistaken for a signal being switched “ON”
  • Superior shock and vibration tolerance, ensuring trouble free use on mobile platforms
  • Robust design with ingress protection to class IP68 for excellent durability in harsh field conditions
  • Superslim form factor - overall dimensions of 150 x 465 x 39 mm (E58X3)
  • DC models support universal connection polarity (common "+" or "-")
  • Quick turn on / turn off to support applications requiring flashing
  • Optional visors available for vertical or horizontal installation

LED Indicator Panel Versions

Depending on the power supply voltage, light intensity, and order of colors, several versions of E58X indicator panels are available. We can offer LED lights based on similar technology with 1, 2, 3, or 4 LED light aspects of green, yellow, red, blue, or white color in any possible combinations.
 
 

E58XX Indicator Panel Family Overall Specifications
Parameter   E581X  E582X
Voltage range
21 - 30V DC
100 - 240V AC 50/60Hz
Typical power consumption per 1 light aspect 
 < 1 W
< 3.5 W
Typical light intensity per aspect, with clear cupola 
40 to 100 cd
40 to 90 cd
Colours  Any required combination of R, G, Y, B, W

Environmental operating conditions
Ambient air temperature from – 40°C to + 55°C (IEC 60068-2-1, IEC 60068-2-2, IEC 60068-2-14)
Relative humidity up to 98 % at temperature up to +35°C  (IEC 60068-2-3)
Salt mist conditions  IEC 60068-2-11
Mechanical vibration 10 - 500 Hz with acceleration up to 10 g (IEC 60068-2-6)
Ingress protection class IP68 (IEC 60529)
Cupola/lens properties Usable over a broad temperature range (– 100 to +135 °C);
Flammability classification: UL 94V-2
maximum temperature in glow wire test: 850 °C; (Makrolon® 2407 polycarbonate by Bayer AG).
Safety class (optical output) Class 2M (IEC 60825-1:1993+A1:1997+A2:2002)

 

Layout and dimensions of LED Indicator Panels E5813 and E5823


Requests for quotations are welcome either to Sabik/Carmanah sales network or to our worldwide distributor to container handling and port industries RAM SMAG Lifting Technologies (UK) Ltd (quotations can be requested from their sales department) - whichever is able to serve your needs better locally. Our products may also be available as spare parts from other port crane and spreader OEMs. When requesting quotations, please specify your power supply and color requirements using the legend below:

For example, E5823.RGY is a LED Indicator panel with 3 LED aspects, colors Red-Green-Yellow, for power supply voltages between 100VAC to 240VAC, supplied with clear polycarbonate cupolas and our standard 5-pole connector.

If you need more information, please do not hesitate to contact our marketing group.

Note: The manufacturer reserves the right to change this specification without prior notice. Makrolon® is a registered trademark of Bayer AG, Leverkusen, Germany.



© 2017 Sabik OÜ, Mäealuse 2/1, 12618 Tallinn, Estonia. Last updated 2017-05-24