Department of Navigation Systems

Lampchanger E390

We regret to inform you that this product is DISCONTINUED; please find our current products here
 

The purpose of the lampchanger is to change the broken lamps against the unbroken ones. Combining the  lampchanger CG-6P (Control Systems Inc.) and an additional measurement unit, a new type of lampchanger E390 with diagnostics has been developed,  giving information about the technical state of all lamps placed in lampchanger. Functioning together with the flasher E862 or E863,  the results of the  measurement of the  lamps  will be received in the flasher as an analog voltage and, encoded into a message, which will be sent to the control centre via remote monitoring system. In this message the technical state of all lamps (broken or not broken) is given. Knowing the actual number of broken lamps, the servicing personnel can change them with new ones in due time and thus, to increase the reliability of a light.

Specifications
 

Lampchanging six-place unit
Lamp power  max 120W
Lamp voltage max 24V
Lamp current  max 10A
Current of measurement unit  max 2mA
Ambient air temperature  from -30C to +70C (IEC 60068-2,1,2,14)
Relative humidity up to 98% at temperature +35C (IEC 60068-2-3)
Application in salt mist conditions is allowed  IEC 60068-2-11
Mechanical vibration  10500Hz, with acceleration up to 2,2g (IEC 60068-2-6)
Overall Dimensions W,H,D 88mm, 116mm, 90mm
Layout and dimensions of the Lampchanger E390

If you need more information, including the information on prices and availability of our products, please do not hesitate to contact our marketing group.


ekta™ Home
Marine Products
LED Products for Signalling
Timers, 
Synchronisation and 
GPS Locators
Communication
Equipment and 
Systems
Contact 
Information
Marine Lanterns
Power Supplies, 
Battery Chargers
Measurement and Automation
Product Index

© 2002 Cybernetica. Last updated 2011-03-01