Department of Navigation Systems

1000W Flasher E175

We regret to inform you that this product is DISCONTINUED; please find our current products here

E175 is a microprocessor based unit for the control of high-power lighthouses with lanterns up to 1000W, to be used in the EKTAs 1000W lighthouse control system E602. It consists of a control unit, an 1kW DC/DC converter, a 50W DC/DC converter for secondary power supply, a 5V voltage stabilizer, and of Echelon LAN interface

  • Programmable automatic control of flashing and control   of lampchanger
  • Precision effective voltage regulated filament output
  • Control of the secondary (reserve) system of the lighthouse
  •  Daylight-dependent switching on and off of the flashing mode and sending the actual switching time messages to the monitoring and control centre
  •  Control of reserve system of the lighthouse
  •  Control of Diesel generator as a secondary energy supply
  • Autosynchronization by the internal clock/calendar to be adjusted either by GPS receiver or by any other flasher in the control and monitoring system. This feature can be used for the synchronization of flashing of leading lights
  • Built-in monitoring and control interface Echelon LAN for the communication with other units
  • Sending diagnostics and emergency messages to the monitoring and control centre via Echelon LAN and the communication controller (state of the power supplies, lamps and, lampchanger)
  •  Simple setting up and programming using a service computer
Input voltages 110 ... 160V DC (primary power supply)
13 ... 15.5V DC (secondary power supply)
Nominal voltage of the lamp 110 or 120V +3V, -1.5V
Output power 100 ... 1000W
Current consumption (15V) 70mA from the secondary power supply
Flash/pause segment duration (1...127)x(10...250)ms
Number of flash/pause segments 2 ... 16
Stability of the built-in clock 0.00005
Daylight control delayed switching by external photosensor,
Inputs 140V, 15V secondary power, Echelon LAN (I/O), photo- and  temperature sensors, lampchanger signals
Outputs 110V 10A  filament, +14V system power, control of reserve system, lampchanger motor
Ambient air temperature from -40C to +55C* (IEC 60068-2-1, 2, 14)
Relative humidity up to  98% at temperature +35C (IEC 60068-2-3)
Dimensions 70x210x314mm
Weight 3kg
Layout and dimensions of the 1000W Flasher E175

If you need more information, including the information on prices and availability of our products, please do not hesitate to contact our marketing group.

ekta™ Home
Marine Products
LED Products for Signalling
Synchronisation and 
GPS Locators
Equipment and 
Marine Lanterns
Power Supplies, 
Battery Chargers
Measurement and Automation
Product Index

© 2002 Cybernetica. Last updated 2011-03-01